123 lines
4.6 KiB
Plaintext
Executable File
123 lines
4.6 KiB
Plaintext
Executable File
# CHANGES
|
|
# -------
|
|
# v0.3a2- fixed bug in "if" operator. Thanks kad@dgtu.donetsk.ua.
|
|
# v0.3a- added TIME parameter. Example:
|
|
# TIME=00:00-19:00;64Kbit/6Kbit
|
|
# So, between 00:00 and 19:00 RATE will be 64Kbit.
|
|
# Just start "cbq.init timecheck" periodically from cron (every 10
|
|
# minutes for example).
|
|
# !!! Anyway you MUST start "cbq.init start" for CBQ initialize.
|
|
# v0.2 - Some cosmetique changes. Now it more compatible with
|
|
# old bash version. Thanks to Stanislav V. Voronyi
|
|
# <stas@cnti.uanet.kharkov.ua>.
|
|
# v0.1 - First public release
|
|
#
|
|
# README
|
|
# ------
|
|
#
|
|
# First of all - this is just a SIMPLE EXAMPLE of CBQ power.
|
|
# Don't ask me "why" and "how" :)
|
|
#
|
|
# This is an example of using CBQ (Class Based Queueing) and policy-based
|
|
# filter for building smart ethernet shapers. All CBQ parameters are
|
|
# correct only for ETHERNET (eth0,1,2..) linux interfaces. It works for
|
|
# ARCNET too (just set bandwidth parameter to 2Mbit). It was tested
|
|
# on 2.1.125-2.1.129 linux kernels (KSI linux, Nostromo version) and
|
|
# ip-route utility by A.Kuznetsov (iproute2-ss981101 version).
|
|
# You can download ip-route from ftp://ftp.inr.ac.ru/ip-routing or
|
|
# get iproute2*.rpm (compiled with glibc) from ftp.ksi-linux.com.
|
|
#
|
|
#
|
|
# HOW IT WORKS
|
|
#
|
|
# Each shaper must be described by config file in $CBQ_PATH
|
|
# (/etc/sysconfig/cbq/) directory - one config file for each CBQ shaper.
|
|
#
|
|
# Some words about config file name:
|
|
# Each shaper has its personal ID - two byte HEX number. Really ID is
|
|
# CBQ class.
|
|
# So, filename looks like:
|
|
#
|
|
# cbq-1280.My_first_shaper
|
|
# ^^^ ^^^ ^^^^^^^^^^^^^
|
|
# | | |______ Shaper name - any word
|
|
# | |___________________ ID (0000-FFFF), let ID looks like shaper's rate
|
|
# |______________________ Filename must begin from "cbq-"
|
|
#
|
|
#
|
|
# Config file describes shaper parameters and source[destination]
|
|
# address[port].
|
|
# For example let's prepare /etc/sysconfig/cbq/cbq-1280.My_first_shaper:
|
|
#
|
|
# ----------8<---------------------
|
|
# DEVICE=eth0,10Mbit,1Mbit
|
|
# RATE=128Kbit
|
|
# WEIGHT=10Kbit
|
|
# PRIO=5
|
|
# RULE=192.168.1.0/24
|
|
# ----------8<---------------------
|
|
#
|
|
# This is minimal configuration, where:
|
|
# DEVICE: eth0 - device where we do control our traffic
|
|
# 10Mbit - REAL ethernet card bandwidth
|
|
# 1Mbit - "weight" of :1 class (parent for all shapers for eth0),
|
|
# as a rule of thumb weight=batdwidth/10.
|
|
# 100Mbit adapter's example: DEVICE=eth0,100Mbit,10Mbit
|
|
# *** If you want to build more than one shaper per device it's
|
|
# enough to describe bandwidth and weight once - cbq.init
|
|
# is smart :) You can put only 'DEVICE=eth0' into cbq-*
|
|
# config file for eth0.
|
|
#
|
|
# RATE: Shaper's speed - Kbit,Mbit or bps (bytes per second)
|
|
#
|
|
# WEIGHT: "weight" of shaper (CBQ class). Like for DEVICE - approx. RATE/10
|
|
#
|
|
# PRIO: shaper's priority from 1 to 8 where 1 is the highest one.
|
|
# I do always use "5" for all my shapers.
|
|
#
|
|
# RULE: [source addr][:source port],[dest addr][:dest port]
|
|
# Some examples:
|
|
# RULE=10.1.1.0/24:80 - all traffic for network 10.1.1.0 to port 80
|
|
# will be shaped.
|
|
# RULE=10.2.2.5 - shaper works only for IP address 10.2.2.5
|
|
# RULE=:25,10.2.2.128/25:5000 - all traffic from any address and port 25 to
|
|
# address 10.2.2.128 - 10.2.2.255 and port 5000
|
|
# will be shaped.
|
|
# RULE=10.5.5.5:80, - shaper active only for traffic from port 80 of
|
|
# address 10.5.5.5
|
|
# Multiple RULE fields per one config file are allowed. For example:
|
|
# RULE=10.1.1.2:80
|
|
# RULE=10.1.1.2:25
|
|
# RULE=10.1.1.2:110
|
|
#
|
|
# *** ATTENTION!!!
|
|
# All shapers do work only for outgoing traffic!
|
|
# So, if you want to build bidirectional shaper you must set it up for
|
|
# both ethernet card. For example let's build shaper for our linux box like:
|
|
#
|
|
# --------- 192.168.1.1
|
|
# BACKBONE -----eth0-| linux |-eth1------*[our client]
|
|
# ---------
|
|
#
|
|
# Let all traffic from backbone to client will be shaped at 28Kbit and
|
|
# traffic from client to backbone - at 128Kbit. We need two config files:
|
|
#
|
|
# ---8<-----/etc/sysconfig/cbq/cbq-28.client-out----
|
|
# DEVICE=eth1,10Mbit,1Mbit
|
|
# RATE=28Kbit
|
|
# WEIGHT=2Kbit
|
|
# PRIO=5
|
|
# RULE=192.168.1.1
|
|
# ---8<---------------------------------------------
|
|
#
|
|
# ---8<-----/etc/sysconfig/cbq/cbq-128.client-in----
|
|
# DEVICE=eth0,10Mbit,1Mbit
|
|
# RATE=128Kbit
|
|
# WEIGHT=10Kbit
|
|
# PRIO=5
|
|
# RULE=192.168.1.1,
|
|
# ---8<---------------------------------------------
|
|
# ^pay attention to "," - this is source address!
|
|
#
|
|
# Enjoy.
|